- Payment Options
- Comments (0)
Mixed design prong snap fasteners - 10,5 mm
The package contains 4 different design of 10,5 mm prong snap fasteners, 25 sets for each type with a total of 100 sets of snap fasteners
- Button capped
- Red flower pattern
- Pink flower pattern
Order options include packages WITH or WITHOUT the application tool.
The package without the application tool is suitable to be applied with...Click here to buy the die set for hand press.
...the easy-to-use hand tool included in 10,5 mm pearl snap fastener kit.
...the suitable die set for the hand press provided on our site.
For hand press;
For application with a hammer;
Please note that as the kit contains small and pointed parts, it may pose a risk of injury to young children.
For all prong snap fastener products, make sure to perform the application carefully, and always test the reliability of the final product.
HINTS FOR SUCCESSFUL ATTACHMENTS WITH EASY-TO-USE TOOLS
- Make sure you keep your hammer perpendicular to the product.
- Make sure to use the correct tool for the correct product. Place the tool perpendicular and also aligned on the product. If any hesitation it is suggested to get help from the "APPLICATION VIDEOS" section.
- At the application point, make sure that the number of fabric layers is even. There shouldn't be any fabric layer differences on the attachment path.
- Make sure to perform a controlled impact with a hammer. Too strong impacts will cause damage to the accessory, too light impacts will cause loose attachment on the application path.
- If it is your first time using such a product, we encourage you to make a few trials on a rag.
- After placing the tool properly on the product, make sure to keep it steady to avoid slippage during attachment.
- Apply your hammering attachments on a hard surface for better results.
- Please hold the plastic holder by the edge for your finger safety.