- Payment Options
- Comments (0)
Mixed prong snap fastener kit - 10,5 mm (Pearl, hollow and capped styles)
A pack contains 75 sets of prong snap fasteners, 25 sets for each style including their application tool.
The handtool allows the snap fasteners to be easily applied with a hammer.
10,5 mm snap fasteners suitable for thin fabric for shirts and knitting, as well as very thin leather material.
- Denim shirts
- Combed cotton garment
- Basic clothing
- Shirts with thin fabric
The easy-to-use tools provided in this kit are compatible with 10,5 mm prong snap fastener spare packages provided in our online store.DIMENSIONS:o Outer diameter: 11,5mmo Height: 3,5 mm
The goods are of stainless brass material with quality plating and are nickel-free (non-carcinogenic).
This product is OEKO-TEX Certified, a globally valid certification indicating that the goods do not contain heavy metals and carcinogens.
Please note that as the kit contains small and pointed parts, it may pose a risk of injury to young children.
For all prong snap fastener products, make sure to perform the application carefully, and always test the reliability of the final product.The application description can be found in the user manual inside the package. Please see below for the application video.APPLICATION VIDEOS:For application with a hammer:;For hand press:
Make sure you keep your hammer perpendicular to the product.
HINTS FOR SUCCESSFUL ATTACHMENTS WITH EASY-TO-USE TOOLS
Make sure to use the correct tool for the correct product. Place the tool perpendicular and also aligned on the product. If any hesitation it is suggested to get help from the "APPLICATION VIDEOS" section.
At the application point, make sure that the number of fabric layers is even. There shouldn't be any fabric layer differences on the attachment path.
Make sure to perform a controlled impact with a hammer. Too strong impacts will cause damage to the accessory, too light impacts will cause loose attachment on the application path.
If it is your first time using such a product, we encourage you to make a few trials on a rag.
After placing the tool properly on the product, make sure to keep it steady to avoid slippage during attachment.
Apply your hammering attachments on a hard surface for better results.
Please hold the plastic holder by the edge for your finger safety.